Why Is Frisco, Texas, Named After a Railroad?
Frisco is named for the St. Louis and San Francisco Railroad, popularly called the Frisco. A line tied to it opened through western Collin County in 1902, and the station was first called Emerson, for landowner Francis Emerson. A Lamar County post office named Emberson was too close, so it became Frisco City, later shortened to Frisco.

A depot that changed its mind
Frisco, Texas, was supposed to be called Emerson, but in 1902 its new depot took the nickname of the railroad system behind the line instead. The new name was a railroad nickname, and the nickname was a shortened San Francisco. So a city about 30 miles (48 km) north of Dallas carries, in clipped form, the name of a city on the Pacific coast.
The Handbook of Texas, the Texas State Historical Association’s encyclopedia, gives the basic story. Its entry says the town was first named Emerson, after Francis Emerson, a McKinney banker who owned the farm where the townsite was laid out. He’d promised to put a national bank in town if it carried his name. The bank never came. And because Emerson looked too much like Emberson, a place in Lamar County, the town became Frisco City when its post office opened in 1902. Later the “City” fell off.
What the McKinney paper printed
You don’t have to take that on faith, because the county-seat newspaper covered it while it happened. On August 1, 1901, the McKinney Democrat ran a short item under the headline “Will be Named Emerson.” It quoted the president of the Red River, Texas and Southern, the company building south from Sherman, which the paper called “the first link in the Frisco’s Rio Grande extension.” Track, he said, would be laid “as far as Emerson in Collin county by Oct. 1.”
Eight months later the trains had come, and so had the problem with the name. On March 27, 1902, the same paper printed a letter datelined “Frisco City, March 24”:
“The station name has been changed from Emmerson to Frisco City by the Railroad company so as to get the station and postoffice together. The P. O. could not be called Emmerson on account of Emberson in Lamar county. The P. O. will probably be changed in a short while.”
That’s the change in the words of someone who was there. Notice the order. The railroad renamed its station first, and the post office was expected to follow. Visit Frisco and Collin County’s genealogy page tell it differently, though. Both say the residents chose Frisco City. The writer also reported four trains a day on a schedule that had begun the day before.
Whose railroad was it?
“Frisco” was the popular name of the St. Louis and San Francisco Railroad. Its name joined two cities, and people shortened the second one. In Texas it worked through local companies. The Handbook’s entry on the St. Louis, San Francisco and Texas Railway says that company was chartered on March 9, 1900, “in the interest of the St. Louis and San Francisco Railroad Company (Frisco),” to build from the Red River to Denison and Sherman.
The line through Frisco itself belonged at first to the Red River, Texas and Southern, which opened between Sherman and Carrollton in 1902. The Frisco’s Texas company bought it on June 25, 1904. So when the town took the name Frisco City, the tracks weren’t yet formally owned by the Frisco’s Texas company, though the 1901 newspaper already counted the line as part of the Frisco’s push south.
The sources don’t all name the company the same way. The Handbook’s town entry credits the St. Louis, San Francisco and Texas Railway Company, “popularly known as the Frisco system.” The city’s tourism office, Visit Frisco, says St. Louis-San Francisco Railway. Every version comes back to the same nickname.
Lebanon, the water stop and the dates
Visit Frisco adds a neighbor to the story. Lebanon, a settlement on the old Shawnee cattle trail, got a post office in 1860. When the railroad came through in 1902, it says, Lebanon sat too high on Preston Ridge for a steam-engine water stop, so the stop went about four miles (6 km) west on lower ground. Some Lebanon residents moved to the new town, a few of them rolling their houses over on logs. Lebanon wasn’t an earlier name for Frisco; it was the town next door that lost people to it.
On timing, the accounts split. Visit Frisco says postal authorities ordered the final name Frisco in May 1902, effective July 1, 1902. The Handbook ties Frisco City to the post office in 1902 and says only that the name was later shortened. Collin County’s own genealogy page puts the switch from Emerson to Frisco City in 1904. The 1902 newspaper letter backs the earlier date for Frisco City, at least for the station.
Back to San Francisco
If you follow the nickname all the way back, you end up in California. A 1905 Geological Survey bulletin on the origin of place names, compiled by Henry Gannett, gave two explanations for San Francisco. Some said the bay, county and city were named for the old Spanish mission of San Francisco de Assisi; others, for the founder of the religious order that Father Junípero Serra belonged to. Either way, the name points back to Saint Francis of Assisi.
So the chain runs from a saint to a California city, to a railroad named for St. Louis and San Francisco, to that railroad’s nickname, and finally to a cotton town in Texas that now spreads west into Denton County. Its neighbor in Collin County, Plano, took its name from the land itself. Frisco took its name from the train.
Quick answers
Why is Frisco, Texas, called Frisco?
It’s named for the St. Louis and San Francisco Railroad, nicknamed the Frisco. A March 1902 newspaper report says the railroad renamed its station from Emmerson to Frisco City, and the name was later shortened.
What was Frisco, Texas, originally called?
Emerson, after Francis Emerson, a McKinney banker who owned the land, according to the Handbook of Texas. The post office couldn’t use it because Emberson, in Lamar County, was too similar.
When did Frisco get its name?
Most accounts say 1902. A local letter dated March 24, 1902, already uses Frisco City, and Visit Frisco says the final name took effect July 1, 1902. Collin County’s genealogy page says 1904.
Key dates
- 1860Lebanon, a community on the Shawnee Trail, gets a U.S. post office, according to Visit Frisco.
- 1900On March 9 the St. Louis, San Francisco and Texas Railway is chartered in the interest of the St. Louis and San Francisco Railroad, the Frisco.
- 1901On August 1 the McKinney Democrat runs the headline "Will be Named Emerson" over news that track will reach Emerson by October 1.
- 1902A March 27 report says the railroad changed the station's name from Emmerson to Frisco City because of Emberson in Lamar County.
- 1904Collin County's genealogy page dates the change to Frisco City to this year, two years later than the other accounts.

Getting there
Open Frisco in Google Maps
Opens in a new tab. The pin is the center of Frisco in the USGS place-name record.
The closest airports, Amtrak stations and intercity bus stops, measured in a straight line from the center of Frisco.
Airports
- Dallas Love Field (DAL) 21 mi 34 km
- Dallas-Fort Worth International (DFW) 21 mi 35 km
Amtrak trains
- Dallas station (DAL) 26 mi 42 km
- Gainesville station (GLE) 38 mi 60 km
Intercity buses
- Greyhound Mckinney New Midway Convenience 12 mi 19 km
- FlixBus Denton 20 mi 32 km
Distances are as the crow flies, not by road. We don't list schedules or fares because they change; check with the airline, Amtrak or the bus company before you go. Official data (FAA commercial service airports (2025), FAA airport locations, Amtrak stations and Intercity Bus Atlas) from the FAA and the U.S. Bureau of Transportation Statistics, checked Nov 13, 2026.
Sponsored
Staying in Frisco?
Compare hotels in Frisco, Texas, on Expedia.
See hotels in FriscoWe may earn a commission if you buy through this link. It never changes what we write. Read our affiliate disclosure
Historical Sources & References
- McKinney Democrat, March 27, 1902. The letter from “Frisco City, March 24” reporting that the railroad changed the station name from Emmerson to Frisco City because of Emberson in Lamar County, and the start of four daily trains.
- McKinney Democrat, August 1, 1901. “Will be Named Emerson,” with the Red River, Texas and Southern described as “the first link in the Frisco’s Rio Grande extension” and track promised to Emerson by October 1.
- David Minor, “Frisco, TX,” Handbook of Texas Online. Francis Emerson and the promised bank, the conflict with Emberson, the renaming for the “Frisco system” when the post office opened in 1902, and the town’s spread into Denton County.
- David Minor, “St. Louis, San Francisco and Texas Railway,” Handbook of Texas Online. The 1900 charter in the interest of the St. Louis and San Francisco Railroad, and the purchase of the Red River, Texas and Southern on June 25, 1904.
- Visit Frisco, “History”. Lebanon’s 1860 post office, the water stop placed about four miles west, the rejected name Emerson and the final name ordered in May 1902, effective July 1.
- Collin County, “Genealogy Corner”. The county’s short note dating the change from Emerson to Frisco City to 1904.
- Henry Gannett, The Origin of Certain Place Names in the United States (USGS, 1905), p. 274. The two explanations for San Francisco: the mission of San Francisco de Assisi or the founder of Father Junípero’s order.
- Geographic Names Information System, Frisco (feature 1336263). Frisco’s record in the national names database, which lists the city in Collin County.
- U.S. Geological Survey, Sherman sheet (1954). A 1:250,000 regional map with the railroad’s name lettered beside the track just north of Frisco.
Spot something wrong, or know more? Tell us here. You can also email us or use our contact page. Corrections are noted here with their date, never made silently.








